Project Details

D80, D100 and D120 are a series of high power amplifiers to complement the D80DSP and D100DSP processing amplifiers.

The rear panel switch allows the amplifier to accept four analog audio channels or pick up four network audio channels via Dante, and then use a 24-bit 96 kHz DAC for conversion.  

Use a single CAT5 cable to connect to the Delta DSP amplifier to achieve a stereo 4-way system without further external processing. Switch back to analog to use as a powerful traditional four-channel amplifier. 

Run bridged channel pairs or link adjacent inputs in analog or digital mode for full flexibility.

Specifications (shared) :

l   Input interface: 4 × XLR (two AES)  

l   output connector port : . 4 × Speakon ( 2 / D120 )  

l   System THD: < 0.08% (2 kW, 1 k)   

l   Power connector: PowerCon

l   Frequency response: 3 Hz – 30 kHz – 3 dB       

l   Rear panel: Powercon, Speakon and XLR connectors, Dante audio network (optional)

Size: ( mm )

l   Body: 2U/88 ( h ) × 482 ( w ) × 428 ( d )  

l   Weight: 10 kg (13 kg D100/120)   

l   Shipping weight : 12 kg/15 kg  

l   Shipping box: 250 ( h ) × 610 ( w ) × 600 ( d )  

Specification D80 :

l   Power amplifier channel number: 4

l   Output power: (per channel)

l   8 ohm 1000 W 

l   4 ohm 2000 W 

l   2.7 ohm 2200 W 

l   2 ohm 2000 W 

l   Output power: (bridged)

l   8 ohm 4000 W 

l   4 ohm 4000 W 

Specification D100 :

l   Power amplifier channel number: 4

l   Output power: (per channel)

l   8 ohm 1400 W 

l   4 ohm 2700 W 

l   2.7 ohm 3700 W 

l   2 ohm 3500 W 

l   Output power: (bridged)

l   8 ohm 5400 W 

l   4 ohm 7000 W 

Specification D120 :

l   Power amplifier channel number: 2

l   Output power: (per channel)

l   8 ohm 2400 W 

l   4 ohm 4600 W 

l   2.7 ohm 6250 W 

l   2 ohm 6800 W