Project Details

F1 is an active high-end monitor speaker with the lowest possible coloration. It has a unique combination of high output, high directivity, extremely clear stereo images and low distortion levels.

It consists of four ( 4 ) a 3 "cone drives and is equipped with a special high-directivity horn, no division. This means that a wider band and a higher phase shift without directivity. With 60 × 10 degrees With nominal dispersion, F1 can easily cover a specific area according to the installation and minimize room coloration.  

F1 has a Class D amplifier, analog filter and EQ network, and a sealed enclosure to ensure a seamless and phase-coherent transition between F1 and the recommended sub-expansion F10.

Features :

l   Very high power to size ratio

l   Because there is no crossover, the phase and attenuation response is abnormally accurate

l   Use F10 to extend the frequency response to 30 Hz 

l   Very high quality Class D amplifier

l   High directivity characteristics of low room coloring

l Robust birch plywood structure

l   Textured semi-matte black paint finish

l   (Other finish options are available upon request)

Application :

l   Front system

l   High-quality nightclub

l   Medium-sized device

l   Music enhancement with subwoofer

Specification :

l   Frequency response ( -4 dB ) : 90 Hz – 15 kHz     

l   Frequency response ( -10 dB ) : 65 Hz – 20 kHz     

l   Horizontal coverage ( -6 dB ) : 60 degrees 

l   Vertical coverage ( -6 dB ) : 10 degrees 

l   Maximum sound pressure level: 110/120 dB (cont/ peak , free space) 

l   Sensitivity, 1w/1m: 102 dB (free space) 

l   Nominal impedance: 4 ohms

l   Amplifier output: 20 W cont, 100 W  peak   

Unit composition :

l   LF/HF : ( 4 ) × 3" cone driver, special horn 

Cabinet :

l   Cabinet : birch plywood, black textured paint finish

l   Signal connector: ( 2 ) × XLR 

l   Power connector: ( 1 ) Neutrik Powercon 

l   Dimensions: 380 mm × 280 mm × 200 mm       

l   Weight: 7  kg