source:Industry News release time:2022-08-01 Hits: Popular:Brand bar audio wholesale
How to quickly distinguish between woofers and tweeters? The following will take you to find out;
A tweeter is also called a tweeter horn, as the name suggests because it is shaped like a horn. The tweeter is the sound restoration unit responsible for the high-frequency part of the sound. Due to the high frequency, its diaphragm is made very thin to adapt to high-frequency vibration, and it is also the unit that is most likely to burn. The woofer is responsible for low-frequency restoration, and the low-frequency vibration is large and slow, so there are very thick speaker cones and restoration voice coils.
Since the treble sound wave has a great impact on the speaker diaphragm, in order to achieve an accurate and undistorted treble effect, the quality of the speaker diaphragm is required to be high. In addition, due to the sound field positioning requirements, the choice of the reverberation direction is also a requirement of the tweeter. For this reason, car tweeters mostly use neodymium iron boron hemispherical tweeters. Its neodymium iron boron magnet is small in size and strong in magnetic force, and the sound film adopts pure silk soft diaphragm. There are also pure carbon dome tweeters and dome-type polyester tweeters coated with styrene rubber, but their sound quality performance is slightly insufficient. The tweeters are mostly installed on both sides of the car dashboard and above the doors on both sides, and the reverberation direction is selected by special rotating supports.
It can be seen from the filter caliber that the small caliber is generally the treble, and the large caliber is generally the bass; it can be seen from the voice coil and rubber membrane that the bass generally has a rubber membrane and has good elasticity, and the treble generally does not have a rubber membrane. Just a voice coil. The woofer is huge, with a large paper cone and rubber edges. Some tweeters are small, and the big ones are very different in shape, such as those of the horn type, which are easy to distinguish.
Popular recommendation
Resolution 4E Bar speakers Factory
2021-07-16F1201 School audio Vendor
2021-07-16MB112Anhui Bar Audio Vendor
2021-07-14F218 Mk2 Learning audio Vendor
2021-07-14F1 Mini bar sound Factory
2021-07-26PSM18 POINT SOURCE MONITOR Speaker bar Factory
2021-07-16Resolution 1.5TT Marten Audio company
2021-07-16Infrabass 218Sound for bars Vendor
2021-07-14DS15 Bar speakers Merchant
2021-07-14Resolution 2 S8KTV audio Vendor
2021-07-17MB210 Low Profile Bar audio set Merchant
2021-07-14SB 210A Bar brand audio Vendor
2021-06-08What are the main equipment of stage audio?
2022-03-18Zunyi FIRST ROOM bar audio system Ma Teng audio
2022-10-31How to combine the stage sound with the scene atmosphere to create a good sound effect?
2022-05-13Analysis of noise problems in professional audio systems
2021-09-14The audio industry may be expected to develop with the smart home!
2022-09-07What if the conference room is not soundproofed? Teach you a few ways to solve the problem that the
2022-03-17Talk about the cleaning of speakers and speakers
2022-10-10ID-X CLUB Ma Teng Audio in Hohhot Bar, Inner Mongolia
2022-09-23Key points of KTV sound design
2022-03-21How to evaluate RCF speakers?Imported bar audio Vendor
2021-12-10Common fault handling of KTV equipment system
2022-12-08Introduction of sound-absorbing materials in stage audio equipment.Sound bar Processor
2022-05-07