Sound exciter adjustment method.Car stereo Vendor

　　1. Put IN/OUT on "IN": At this time, the corresponding indicator will light up, so that the exciter will enter the working state.

　　2, TUNE is placed at the 12 o'clock position: This knob should be flexibly adjusted according to the needs of the excitation frequency.

　　3. Put HIGH/NORMAL at the required position: Put it at NORMAL for comprehensive processing, and put it at HIGH for other processing.

　　4, MIX (harmonic content) and GIRTH (low volume): When starting to adjust, they are placed in the smallest position.

　　5. Raise the MIX until you hear the fringing sound (the sound becomes brighter): pay attention, this kind of sound is not particularly obvious.

　　6. Adjust TUNE to improve the timbre or penetration of the sound: pay attention to distinguish the timbre. When adjusting, you can use music and microphone to adjust in turn, usually adjust to the 11-14 o'clock position similar to the clock.

　　7. Repeat the adjustment of MIX until the harmonic effect is satisfied: generally adjust to the 13-15 o'clock position similar to the clock.

　　8. Raise OVERTHANG and adjust its indicator light to flash: generally adjust to the 11-14 o'clock position similar to the clock. The bass time is too short and there is no fullness. If it is too long, it is easy to become muddy. Please adjust it carefully.

　　9. Increase GIRTH and adjust OVERTHANG at the same time until the bass effect is satisfactory: generally adjust to the 10-13 o'clock position similar to the clock.

　　In the process of adjustment, you can use IN/OUT to compare the sound effects with and without excitation, and adjust repeatedly until the treble is bright and clear, the bass is full and flexible, and the soft and hard strength is suitable. Of course, there are various exciters nowadays, and their functions and adjustment methods are different. Only by learning, watching and listening can we adjust each audio device well.

Read recommendations:

Resolution 4D Downfill KTV audio Factory

F88 Car stereo Merchant

C12 Bar hall sound Merchant

Sound insulation treatment of professional audio!Bar use audio Vendor

The advantages of speakers produced with RCF units