A1 is a compact active drive passive 3-way speaker system. It is composed of 15 " neodymium magnet low-frequency driver , 6.5 " tapered driver loaded multipath waveguide and two 0.65 " exit compression driver loaded dual outlet waveguides.
A1 is a compact active drive passive 3-way speaker system. It is composed of a 15 " neodymium magnet low-frequency driver , a 6.5 " tapered driver loaded multipath waveguide and two 0.65 " exit compression driver loaded dual exit waveguides.
The 15 " low-frequency driver is equipped with a narrow Q bandpass horn with extra sensitivity, which is actually equivalent to two front-loaded 15" drivers with an SPL exceeding 80-300 Hz. Since the enclosure does not exceed the size of a single 15" driver, this design sets a new standard for the sound pressure ratio and size ratio of compact full-range speakers.
The core of A1 is the M6 intermediate frequency driver, which is composed of a 6.5" neodymium magnetic cone driver and an international patented multipath waveguide. This technology not only improves the sensitivity of 10 decibels, but the M6 channel also eliminates harmonics, making the maximum sound pressure level lower The distortion level is 10-20 decibels lower than a standard speaker system of the same size. The M6 also has a wide horizontal beamwidth and a high cutoff frequency of 4kHz, so a small diaphragm and light compression driver can be used to improve sensitivity and detail. A1 by Aura Audio D80DSP or D100DSP powered controller driver.
application:
l High-quality bar
l l Medium-sized fixed installation place
Specification:
l Frequency response ( +-3 dB): 85 – 22000 Hz
l Horizontal coverage ( -6 dB): 90 degrees
l Vertical coverage ( -6 dB): 15 degrees (30 degrees can be customized)
l Maximum peak sound pressure: 137 dB (free space)
l Sensitivity LF, 1w/1m : 103 dB (free space)
l Sensitivity HF, 1w/1m : 110 dB (free space)
l Crossover point: 300 Hz active , 3.5 kHz passive
l Power handling low frequency: 500 W rms, 2000 W p ea k
l Power handling high frequency: 125 W rms, 500 W p ea k
l Recommended high voltage filter: 76 Hz, 24dB/oct
Unit composition:
l Woofer: ( 1) × 15 " neodymium magnetic cone driver, loaded with band-pass speaker
l Midrange unit: ( 1) × 6.5 " neodymium magnetic cone driver, speaker loading
l Tweeter: ( 2) × 0.65 " outlet compression driver, dual-outlet waveguide
Cabinet:
l Cabinet : birch plywood, black textured paint finish
l Grille: cold rolled steel grille, black textured paint surface
l Connector: ( 2) x NL4, +/-1 : LF, +/-2 : HF
l Dimensions: 455 mm x 430 mm x 430 mm
l Weight: 24 kg
Popular recommendation
XQ48 Bar sound bar Merchant
2021-07-26C15 Bar sound bar wholesale
2021-07-26XD18I Bar speakers wholesale
2021-07-26C12 Bar hall sound Merchant
2021-07-26A3 Home ktv audio Merchant
2021-07-26D2 AMPS Bar speakers wholesaler
2021-07-26I3 Small bar sound Vendor
2021-07-26XD12 Brand bar audio Vendor
2021-07-26A28 CARDIOID SUBWOOFER Learning audio Merchant
2021-07-26A6 ktv bar sound wholesale
2021-07-26F10 Nightclub sound Vendor
2021-07-26A1 Car stereo manufacturer
2021-07-26Common problems encountered in sound engineering and their solutions.Audio conference room
2022-10-26What should I pay attention to when buying professional audio?Bar sound engineering Vendor
2021-11-18Chengdu CLUB DNA Bar | Asian Flagship Store xFUNKTION-ONE
2020-08-10The role of sound.Marten Audio Vendor
2021-12-11Introduction of sound-absorbing materials in stage audio equipment.Sound bar Processor
2022-05-07Dingyuan TAICHIPARTY CLUB special audio---Mateng Audio
2022-07-04Which aspects should I start from when buying KTV entertainment audio?Small bar sound
2022-03-03School auditorium sound reinforcement system design description.Sound bar Processor
2022-04-26Chengdu DNA Bar Performance Audio--Mateng Audio
2022-06-13What are the reasons that affect the sound of audio equipment?Guizhou Conference Room Audio
2022-06-07The difference between full-range speakers and crossover speakers
2022-07-14What are the parts of the sound
2022-08-19