The rainy season is coming, how to deal with the moisture-proof maintenance of KTV audio equipment

　　Continuous cold and humid rainy days, clothes that never dry out, socks that are not enough to buy, and the ground that is always wet. Are these all your troubles? not enough! In the rainy season, it can be said that the high frequency of damp audio equipment, especially KTV audio equipment. Because the KTV boxes are often closed and not ventilated, the KTV boxes are generally damp on rainy days, and the KTV audio equipment will also be damp due to this. Next, let the editor explain to the KTV merchants what to do to prevent KTV audio equipment from being damp.

　　KTV audio equipment

　　If the humidity in the KTV box is too high, the sound cone of the KTV audio equipment will be easily damp and moldy, resulting in weak sound playback, and the exposed metal connecting wires are also easy to oxidize. The editor's suggestion for this: put some dehumidifiers and desiccants indoors. In addition, dust removal from the speakers of KTV audio equipment is also very important. A dust cover should be added when the speaker is not in use; the surface of the speaker of the KTV audio equipment can be cleaned with a towel dampened with water and wrung out and wiped, but do not get the speaker unit wet and can be turned on after the water is completely dry.

　　Audio equipment manufacturers

　　In addition, the editor believes that there is no better and more proper way to prevent moisture than buying professional KTV audio equipment with good waterproof performance from the beginning! WE-1010 KTV special audio, unique cabinet shape and internal structure, made of 15mm+18mm high-quality high-density birch plywood, to minimize the resonance of the cabinet under large dynamic conditions, and the surface is made of black multi-layer water-based environmental protection and waterproof Paint, two Neutrik NL4MP sockets connected in parallel on the rear terminal board, hexagonal steel mesh with special sound-transmitting mesh cloth, provide better unit protection while ensuring the effective transmission of sound.

　　Bar sound engineering needs to consider these design principles

　　A good sound project must have a standardized design, let alone a high-quality sound project is inseparable from scientific and rigorous design. There are many quality factors in sound engineering, and it is a highly comprehensive technology. With the development of technology and the improvement of equipment grades, the cost of the project will also become higher and higher. Bar audio engineering is an aspect that needs to be paid attention to. Therefore, if the bar engineering is not well designed, then consumers will naturally not have a good hearing of the audio!

Read recommendations:

Resolution 1.5 ktv bar sound Vendor

EVO 7THBar sound company

Resolution 1 Bar ktv sound Vendor

Analysis of the cause of the failure of the speaker unit

How much is the speaker for the bar? Mateng Audio